Multi-Tech Systems MT3334ZDX - Manual (Page 18)

MT3334ZDX/V Owner's Manual
18
Hardware/Software Confirmation
To confirm that your modem (hardware) and communications package
(software) is working properly:
1. Go into terminal mode in your communications package.
2. To determine if your computer and modem are communicating
properly, Enter: AT<CR> At this point your video monitor should
display
OK. If the characters you typed do not appear or if double
characters appear, see the troubleshooting section of this chapter.
3. To confirm how your MultiModemZDX is configured, enter AT&V<cr>.
What is then reported is how the MultiModemZDX is currently
configured.
Figure 2-5. MultiModemZDX Configuration Confirmation