Multi-Tech Systems MT3334ZDX - Manual (Page 23)

2 - Installation
23
To change the dial prefix in your communications package, select
Setup, Modem; then select the modem type you are using, and type
the new prefix in the Dial Prefix box. To change the dial prefix in
Windows Terminal, select
Settings, Modem Commands. To change
it in Windows 95 HyperTerminal, select Call, Connect from the menu
bar, click Dialing Properties, and type 9 in the local and long distance
boxes in How I Dial from This Location.
• If the modem reports NO ANSWER, the other system has failed to go
off-hook, or you might have dialed a wrong number. Check the
number.
• If the modem reports NO CARRIER, the phone was answered at the
other end, but no connection was made. You might have dialed a
wrong number, and a person answered instead of a computer, or you
might have dialed the correct number but the other computer or
software was turned off or faulty. Check the number and try again, or
try calling another system to make sure your modem is working. Also,
try calling the number on your telephone. If you hear harsh sounds,
then another modem is answering the call, and the modems may be
having problems negotiating because of modem incompatibilities or
line noise. Try connecting at a lower speed.