Ultranet edge 3000 features, Ultranet edge 3000 features -4 – McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 User Manual
Page 36
1
1-4
McDATA UltraNet Edge 3000 User Guide
UltraNet Edge 3000 Features
UltraNet Edge 3000 Features
This section describes the features for the Fibre Channel, 10/100
Ethernet, Gigabit Ethernet, OC-3 ATM interfaces and configuration
for the UltraNet Edge 3000.
Appendix C, Cables, Connectors, and Adapters
for detailed
specifications on each interface card.
Fibre Channel
•
Runs with either FCXL2 (1 Gigabit) Fibre Channel card or FCBB
(1 or 2-Gigabit) Fibre Channel card
•
Mixed application mode supports an FCXL2 and FCBB Fibre
Channel card in the same chassis
•
Auto-negotiation
•
Fibre Channel originator and responder modes
•
Full-duplex send and receive buffers
•
Class 2, Class 3, and Class F connection
•
FCSW (internal Fibre Channel switch) application
•
FICON emulation support of XRC, VTS, and native tape (with
GigE only)
•
FICON support of other FICON connections (CTC and other
non-storage devices, GigE only)
•
Optional short wave (850nm) Small Form-Factor Pluggable (SFP)
optical transceiver for distances of up to 500 meters over
multi-mode fiber
•
Optional long wave (1310 nm) Small Form Factor Pluggable (SFP)
optical transceiver for distances of up to 10 kilometers using
single-mode fiber
•
Fibre Channel Frame Level CRC
•
Fibre Channel End to End CRC for FC/SCSI Tape Pipelining
(Device Extension