McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 - Manual (Page 85)

5
Configuring an E_Port Extension over an Ethernet WAN 5-9
Configuring a 1x1 Ethernet Wide Area Network
5. Repeat step through step for the second node (Node 20).
6. Continue the configuration process by proceeding to the “Setting
the License Information” procedure.
Setting the License
Information The License Key Wizard determines which features can be enabled
for your network.
1. Right-click on Node10 and select Set License Info from the menu
that appears.
The License Wizard - Introduction dialog box appears.
NOTE: If you need more detailed help, see the UltraNet ConfigManager Online
Help.
2. Click the Next button.