Mace DVR1604RW - Manual (Page 14)

DVR1604RW Digital Video Recorder
Operational Manual © 2004 Mace Security Products 14
2. Recording
The default recording mode after startup of the DVR is 24 hr continuous recording for each
channel. The User can program customized recording times for each camera. Instructions for the
different recording modes are as follows:
a) Schedule Recording:
· Enter the menu, and set the schedule period for the recording. See details at Menu>System
setting>Schedule
b) Manual Record Selection
· Press “Record” button on the remote controller or “Rec” on the front panel.
· Check the status of each channel in the recording menu; The Highlighted channels are in record
mode.
· To select the channel to be recorded, press the related number key. Selected camera # will
highlight on your screen. When all cameras that need to be recorded are selected, press Enter to
begin the recording.
· Repeat above steps and remove the highlight to stop the camera from recording. · Press
Cancel or ESC to return without changes.
c) Alarm recording
· Connect the alarm input according to the device connection and the instructions .
· Program the related settings in the menu to start Alarm recording. See details at
Menu>System setting>Alarm setting
d) Motion detection recording
· Record the channel only in need of motion detection. First confirm whether this channel is
programmed in Schedule Recording; if it is, please turn off Schedule Recording for the selected