Mace DVR1604RW - Manual (Page 63)

DVR1604RW Digital Video Recorder
Operational Manual © 2004 Mace Security Products. 63
1
System Setting of the Terminal
The system’ s operation can also be controlled through the RS232 port. The specific operation is as follows: First, copy
“Terminal” and new DVR system software to the computer. Connect the computer with the DVR via the RS232 port . Run
“Terminal” program and create the connection between the computer and the DVR.
The settings information for the connection is: Baud rate— 115200bps
Data bit— 8 bits
Stop bit— 1 stop
Check — no parity
Control on data flow— no
You can log in by username admin (default user with administrator) for the serial port login.
Login steps:
Press any key to enter the login interface which displays the following:
Username: admin
Input the name; press the “enter” key. Then, input the password as follows:
Password: admin
If the username and password are correct, the system will allow entry via the serial port. The detailed
functions are the same as the menu setting.