Mace DVR1604RW - Manual (Page 48)

DVR1604RW Digital Video Recorder
Operational Manual © 2004 Mace Security Products. 48
Net transmission Protocol- There are TCP and Multicast (two types ). Multicast protocol: the 1
st
user
logged in can control power, can view the image at will and other users can only follow this user to view the
image. 5 users are allowed to view at the same time. TCP protocol: each user can view the image at will.
According to the need, users can choose between different protocols. If viewing is through the Internet you
must choose TCP. Up -to 5 users are allowed to view at the same time.
Alarm When there are alarm input signals, the user can select the recording channel and the output port for
the actual need
. 4-22
Motion detection When the user sets the time period for Motion Detection, the motion detection will take
effect. The blue area is the selectable motion detection area. The User can move the dialogue box to choose
the correct area and can also set the sensitivity of the area due to the need. Click Full screen or press right
key on the area to display the motion detection area in full screen mode. After setting the area the user can
Save channel or Clear the area. The Alarm output field allows you to activate an output relay. The default
port is 2. If you want to set this channel fully as motion detection recording, you have to turn off the schedule
recording of this channel.