Mace DVR1604RW - Manual (Page 36)

DVR1604RW Digital Video Recorder
Operational Manual © 2004 Mace Security Products. 36
Alarm in Set Alarm input connection
Alarm out Set Alarm output connection
Default
Net user
Default
Press pq to get the setting and press ENTER to confirm. After the default
setting is selected, system will restore the original Factory Default settings.
6.4.5 Backup
Menu of Backup is pictured at Right:
Backup records
Move the cursor to select the backup device, channel number, backup
speed, starting data and time, ending date and time, and then select to start the
backup, and system will display the backup processing. If the user does not
connect the backup device correctly, the system will display: No backup disk; if
the device is full, it will display: Disk is full. During the backup, it will display the
time. For the backup device you can choose among HDD/USB/CDR. If HDD is
chosen as the device, the backup speed can be selected between Fast and Normal.
If the backup speed is Fast, system will stop the current recording.
Delete backup
Select the backup device you want to delete the records from first, and
then confirm the deletion by selecting
6.4.5 LOGOUT
Press ENTER to logout. To enter the menu again, password is needed.
LOAD DEFAULT CONFIGURES?
YES NO
Default
1 2 3 4 5 6 7
SAVE CANCEL
RESUME NETUSER?
OK CANCEL
SURE TO LOAD
OK CANCEL
1 2 3 4 5 6 7 8
SAVE CANCEL
SURE TO LOGOUT?
OK CANCEL
DELETE BACKUP
DEVICE HDD
SURE TO DELETE ?
OK CANCEL