Motorola SYMBOL MINISCAN MSXX04 - Manual (Page 147)

Parameter Menus 10 - 41
Convert UPC-E1 to UPC-A
Parameter # 26h
Enable this parameter to convert UPC-E1 (zero suppressed) decoded data to UPC-A format before transmission.
After conversion, data follows UPC-A format and is affected by UPC-A programming selections (e.g., Preamble,
Check Digit).
Scan DO NOT CONVERT UPC-E TO UPC-A to transmit UPC-E1 (zero suppressed) decoded data.
Convert UPC-E1 To UPC-A
(Enable)
(01h)
*Do Not Convert UPC-E1 To UPC-A
(Disable)
(00h)
EAN Zero Extend
Parameter # 27h
When this parameter is enabled, five leading zeros are added to decoded EAN-8 symbols to make them
compatible in format to EAN-13 symbols.
Disable this parameter to transmit EAN-8 symbols as is.
Enable EAN Zero Extend
(01h)
*Disable EAN Zero Extend
(00h)