Motorola SYMBOL MINISCAN MSXX04 - Manual (Page 150)

10 - 44 Symbol MiniScan MSXX04 Series Integration Guide
Linear UPC/EAN Decode
Parameter # 44h
This option applies to code types containing two adjacent blocks (e.g., UPC-A, EAN-8,
EAN-13). When enabled, a bar code is transmitted only when both the left and right blocks are successfully
decoded within one laser scan. Enable this option when bar codes are in proximity to each other.
UPC Half Block Stitching
Parameter # 4Ah
This parameter enables UPC Half Block Stitching.
Enable Linear UPC/EAN Decode
(01h)
*Disable Linear UPC/EAN Decode
(00h)
NOTE This option is supported by the MS2204, MS2204VHD and MS3204 only.
Enable UPC Half Block Stitching
(01h)
*Disable UPC Half Block Stitching
(00h)