Motorola ENTERPRISE DIGITAL ASSISTANT MC70 - Manual (Page 157)

Wireless Applications 7 - 33
Options
Use the wireless Option dialog box to select one of the following operation options from the drop-down list:
• Operating Mode Filtering
• Regulatory
• Band Selection
• System Options
• Change Password
• Export.
Operating Mode Filtering
The Operating Mode Filtering options cause the Find WLANs application to filter the available networks found.
Figure 7-45 OP Mode Filtering Dialog Box
The AP Networks and Ad-Hoc Networks check boxes are selected by default.
Tap Save to save the settings or tap X to discard any changes.
Regulatory Options
Use the Regulatory settings to configure the country the EDA is in. Due to regulatory requirements (within a
country) a EDA is only allowed to use certain channels.
Table 7-23 OP Mode Filtering Options
Field Description
AP Networks Select the AP Networks check box to display available AP networks and their
signal strength within the Available WLAN Networks (see Find WLANs
Application on page 7-3 ). These are the APs available to the EDA profile for
association. If this option was previously disabled, refresh the Available WLAN
Networks window to display the AP networks available to the EDA.
AD-Hoc Networks Select the Ad-Hoc Networks check box to display available peer (adapter)
networks and their signal strength within the Available WLAN Networks . These
are peer networks available to the EDA profile for association. If this option was
previously disabled, refresh the
Available WLAN Networks window to display the
Ad Hoc networks available to the EDA.