Motorola ENTERPRISE DIGITAL ASSISTANT MC70 - Manual (Page 57)

Accessories2 - 27
To charge the EDA’s battery while the EDA is in the Trigger Handle, insert the EDA into either the Single Slot
USB/Serial cradle or the Four Slot Ethernet cradle.
Figure 2-34 Inserting the EDA Into the Cradle for Charging
Cables
This section describes how to set up and use the cables. The cables are available with a variety of connection
capabilities.
The following MC70 communication/charge cables are available:
• Serial (RS232) Charge cable (9-pin D female with power input receptacle)
• USB Client Charge cable (standard-A connector and a barrel receptacle for power)
• Auto charge cable
• DEX cable
• Modem inverter cable.
The following printer cables are available directly from the printer manufacturer:
• O’Neil Printer cable
• Zebra Printer cable.