Other functions, English – Marantz VS3002 User Manual
Page 17
12
ENGLISH
OTHER FUNCTIONS
7
When you want to control a projector:
Set the REMOTE LINK switch to “VP”
1.
Connect the unit and the projector. Connect the HDMI1 of the projector and OUTPUT 1 jack
of the unit.
Note:
This function only works when the HDMI1 jack of a projector made by Marantz is
connected to the OUTPUT 1 jack of the unit. It will not function correctly when other jacks
are connected.
2.
Perform the remote control connections for the unit and the projector.
3.
Set the REMOTE LINK switch on the rear panel of the unit to “VP.”
4.
When you press INPUT button 1 to 6 on the unit or remote controller, the projector is
switched automatically to HDMI input from other input modes (the S-Video jack in the
connection diagram).
AC IN
AC IN
OFF
OFF
VP
VP
SR
SR
OUTPUT
OUTPUT
REMOTE
REMOTE
LINK
LINK
REMOTE
REMOTE
CONTROL
CONTROL
EXTERNAL
EXTERNAL
INTERNAL
INTERNAL
OUT
OUT
IN
IN
FLASHER
FLASHER
IN
IN
RS-232C
RS-232C
6
5
4
3
2
1
INPUT
INPUT
2
1
STANDBY
POWER
PAUSE
PLAY
OPEN/CLOSE
STOP
ON/OFF
LEVEL
+
PHONES
-
HDMI/DVI
RESOLUTION
FL OFF
HDMI1
HDMI
OUTPUT
IN
S-VIDEO
REMOTE
CONTROL
IN
S-VIDEO
OUT
Video deck
Projector
DVD player
HDMI
connection
Remote
connection
Set to VP