Metrologic Instruments MS951 - Manual (Page 25)

* *
R 4 6
R 4 7
R 6 8
R 6 9
H H 3
H H 4
Enter/Exit Program Mode
20
KB Parameter - Caps Lock Mode
When Caps Lock is used on the keyboard, Enable Caps Lock
choose ENABLE CAPS LOCK. Once
enabled, the scanner will simulate Caps
Lock keyboard input. This mode will not
work with all keyboard types.
** Disable Caps Lock
To detect automatically if Caps Lock is used,
enable AUTODETECTION CAPS
LOCK Enable Auto Detection
MODE. This will only work with Caps Lock Mode
an AT computer.
** Disable Auto Detection
Caps Lock Mode
KB Parameter - Alt Mode
When this option is enabled, the scanner Enable Alt Mode
will duplicate this keyboard sequence:
Hold down the Alt key; type the decimal
number that corresponds to the appropriate
keyboard character. Caution should be **Disable Alt Mode
observed when using Alt mode because a
scanner to host application conflict may
occur if the host software application uses
the Alt key as a “Hot” key.