Metrologic Instruments MS951 - Manual (Page 39)

* *
R 5 2
R 5 3
R 7 0
R 7 1
S P 1
S P 2
S P 3
S P 4
S P 5
S P 6
S P 7
S P 8
Enter/Exit Program Mode
34
Convert EAN-8 to EAN-13 When this option is selected, the scanner will
convert EAN-8 to EAN-13 by transmitting
five zeroes before the bar code.
** Do Not Convert EAN-8 to EAN-13
Enable “$” Prefix ID for UPC/EAN
** Disable “$” Prefix ID for UPC/EAN
UCC Supplemental Options
Enable 2 Digit Supps When this option is enabled, the scanner will scan 2
digit supplementals.
** Disable 2 Digit Supps
Enable 5 Digit Supps When this option is enabled, the scanner will scan 5
digit supplementals.
** Disable 5 Digit Supps
Enable Bookland When this option is enabled, the scanner will
require that a 5-digit supplement be scanned
whenever an EAN-13 code begins with 978.
** Disable Bookland
Supplement Required When this option is selected, all UPC/EAN labels
that are scanned must have a supplement.
** Supplement Not Required