Metrologic Instruments MS951 - Manual (Page 43)

* *
C T M
C T N
I T 2
I T 1
R 5 4
R 5 5
Enter/Exit Program Mode
38
Interleaved 2 of 5 (ITF)
** Enable ITF When this option is enabled, the scanner will
scan Interleaved 2 of 5 (ITF) bar codes.
Disable ITF
Enable ITF Check Digit When this option is enabled, the scanner will
scan ITF bar codes that have a Modulo 10 check
digit.
** Disable ITF Check Digit
** Transmit MOD 10 When the transmit option is chosen, the
ITF Check Digit scanner will transmit the ITF MOD 10 check
character. This feature works with the ITF check
digit option. Both must be enabled in order for
this feature to work.
Do Not Transmit Note: ITF Mod 10 check digit testing must
MOD 10 ITF Check Digit be enabled to suppress check digit
transmit.