Metrologic Instruments MS951 - Manual (Page 47)

* *
R 0 2
R 0 3
R 0 4
R 0 5
R 0 6
R B C
R B D
Enter/Exit Program Mode
42
ITF Minimum Symbol Length Test
A custom minimum character length can be configured for only ITF bar
codes. This leaves shorter minimum lengths for other code types possible. The
scanner will not scan codes with fewer than the configured minimum of
characters. To activate, first scan an ITF character lock length. Then scan
RBC-enable minimum test. This feature overrides ITF character locking.
Enable ITF Minimum
Symbol Length Test
Disable ITF Minimum
Symbol Length Test
MSI Plessey Check Digit
Enable MSI Plessey When this option is enabled, the scanner will
scan MSI Plessey bar codes.
** Disable MSI Plessey
**Enable MSI Plessey Test of Check Digit
When this option is enabled, the scanner will
check the MSI Plessey bar code for a proper
check digit.
Disable MSI Plessey Test of Check Digit
**Enable MSI Plessey When this option is enabled, the scanner will
Mod 10 Check Digit scan MSI Plessey bar codes that have a single
Modulo 10 check digit.