Metrologic Instruments MS951 - Manual (Page 37)

* *
C T A
C T B
C T C
C T D
L Z 5
L Z 6
C K 4
C K 3
L Z 3
L Z 4
Enter/Exit Program Mode
32
UPC/EAN Code
UPC and EAN are typical bar code types. The ** Enable UPC
default settings for UPC and EAN are enabled.
Disable UPC
** Enable EAN
Disable EAN
UPC-A Options
**Transmit UPC-A When this option is selected, the scanner
Number Sys will transmit the UPC-A number system
character. Metrologic strongly discourages the
disabling of this feature because duplicate
numbers may result in the database when
Do Not Transmit the scanner is programmed not to transmit
UPC-A Number Sys the UPC-A number system character.
**UPC-A Check Digit On When this option is on, the scanner will
transmit the UPC-A check digit.
UPC-A Check Digit Off
Convert UPC-A to EAN-13
When this option is selected, the scanner will
convert UPC-A to EAN-13 by transmitting a
leading zero before the bar code.
** Do Not Convert
UPC-A to EAN-13