MITSUBISHI ELECTRIC 148 Series - Manual (Page 22)

22 3. TV Connections
HDTV Cable Box or Satellite Receiver, DVD Player, or Other Device with
Component Video
If your cable box or satellite receiver has an HDMI
output, use the connections for HDMI devices
described on this page.
Required: RCA component video cables, left/right
analog stereo audio cables.
Connect RCA-type cables from the 1. Y Pb Pr outputs
on the device to the Y Pb Pr inputs on the TV main
panel, matching the colored green, blue, and red
connections.
Connect left (white) and right (red) audio cables
2.
from the device to AUDIO L and R on the TV main
panel.
Cable Box or Satellite Receiver Only: 3. Connect
the cable from the outside cable or satellite service
to
CABLE IN or SATELLITE IN on the cable box or
satellite receiver. See your device’s owner’s guide
for instructions and cable compatibility.
Note: To hear digital surround sound, connect the digital
audio output from the device directly to your digital
A/V receiver.
HDMI
4
3
2
1
IR-
Output / External
Controller Input
S-VIDEO
VIDEO
AUDIO
L
R
AUDIO
R
DVI/PC
L
INPUT3
INPUT2 INPUT1
L R
AVR AUDIO
OUTPUT
AUDIO
L
R
Pb
Y Y / VIDEO
Pr
ANT2/AUX ANT1/MAIN
DIGITAL AUDIO
OUTPUT
NetCommand
) i 0
8 0 1 /
p 0
2 7 /
p
0 8
4 / i
0 8
4 (
INPUT1
AUDIO
L
R
Pb
Y / VIDEO
Pr
) i 0
8 0 1 /
p 0
2 7 /
p
0 8
4 / i
0 8
4 (
INPUT1
AUDIO
L
R
Pb
Y / VIDEO
Pr
) i 0
8 0
1 /
p 0
2 7 /
p
0 8
4 / i
0 8
4 (
Pb Y Pr
AUDIO
L R
TV
main
panel
2.
2.
1.
1.
3.
CABLE IN or
SATELLITE IN
Incoming from
cable service or
satellite dish
Figure 1. Connecting a device with
component video outputs
Required: HDMI-to-HDMI cable.
Connect an HDMI cable from the TV main panel to the
HDMI device output. HDMI devices provide video and
audio through the single cable.
Mitsubishi recommends you use category 2 (high-
speed) HDMI cables to connect HDMI 1.3 source
devices. High-speed category 2 cables bring you the
full benefits of Deep Color and
x.v.Color. See “HDMI
Cable Categories,” page 10, for more on HDMI cable
types.
IMPORTANT
HDMI and Audio Signals
Digital Surround Sound: The TV’s HDMI inputs
can receive digital stereo audio signals only. To
hear digital surround sound from an HDMI device,
connect the device’s HDMI or digital audio output
directly to your A/V receiver. See the Owner’s
Guides for those devices for instructions.
HDMI
4
3
2
1
IR-
Output / External Controller Input
S-VIDEO
VIDEO
AUDIO
L
R
AUDIO
R
DVI/PC
L
INPUT3
INPUT2 INPUT1
L R
AVR AUDIO
OUTPUT
AUDIO
L
R
Pb
Y Y / VIDEO
Pr
ANT2/AUX ANT1/MAIN
DIGITAL AUDIO OUTPUT
NetCommand
) i 0
8 0
1 /
p 0 2 7 /
p
0 8 4 / i
0 8 4 (
AUDIO
R L
Any HDMI
device
TV main
panel
Figure 2. Connecting an HDMI device.
Note: HDMI inputs are certified for proper
interoperability with other products certified by
Simplay
™ .
HDMI Device (Cable Box, Satellite Receiver, DVD Player, or Other Device)