MITSUBISHI ELECTRIC 148 Series - Manual (Page 42)

42 5. TV Menus
Audio Menu
To make audio adjustments:
From the Audio menu: •
Press 1. to highlight an option
Press 2. to display the submenu and adjust.
Press 3. MENU to return to the AV menu.
While watching TV: • Press the AUDIO key repeatedly
to display the audio option you want to change.
Press to change settings.
AV menu, Audio options
Bass Controls volume of low-pitched sound from the TV speakers.
Treble Controls volume of high-pitched sound from the TV speakers.
Balance Controls audio balance between the right and left TV speakers
Sound Mode Normal No special audio effects from the TV speakers
Expand Modifies audio from the TV speakers.
•
For monaural (non-stereo) programs, creates a simulated stereo effect.
• For stereo programs, creates a simulated surround sound effect.
Listen To
Available for
analog chan-
nels from
ANT1/ANT2 or
an analog VCR
recording.
Stereo Default setting. The TV plays stereo broadcasts in stereo and mono broadcasts in mono. The
word
Stereo is displayed when you tune to a channel broadcasting in stereo.
Mono Reduces background noise. Use when receiving a weak stereo audio signal. All audio is
played as mono with this setting.
SAP
(Second Audio
Program) Selects an additional monaural sound track not audible during normal TV viewing. The SAP
signal might be related to the program (such as a sound track in a foreign language), or it
might be unrelated (such as a weather report). If an SAP signal is broadcast, the letters
SAP
are displayed when you tune to the channel
Language English, French,
German, Italian,
Portuguese,
Spanish, Other Selects the current language for a digital program from ANT1 or ANT2. Each digital program
may include zero to seven language choices.
Available for digital channels from ANT1/ANT2 only
Level Sound On, Off Reduces differences in sound volume between programming segments, such as the differ-
ence between regular broadcast programs and commercial segments.
Audio Menu Options
Speakers The Speakers option displays only if an A/V receiver connection has been detected. The setting you select is
applied to all TV inputs.
TV Turns on the internal TV speakers.
AV Receiver Turns off the TV speakers so you hear sound only from a connected A/V receiver.
Note: When you disconnect an analog A/V receiver, be sure to manually change the Speak-
ers setting to TV to hear sound from the TV speakers.
Subwoofer
(246 Series TVs) Off, On The Subwoofer option displays only if a subwoofer connection has been identified on the SUB-
WOOFER OUTPUT jack. The setting is applied to all TV inputs. Use Off to turn off audio to a
subwoofer or to reset the
AVR AUDIO OUTPUT jack. See reset instructions on page 16.