Setup menu, continued – MITSUBISHI ELECTRIC 148 Series User Manual
Page 46
46
5. TV Menus
Setup Menu, continued
Clock
Use either the manual or auto method to set the clock.
Set the clock if you wish to:
• Use the TV’s Timer function.
• Maintain accurate ChannelView listings.
246 Series TV. If you have enabled the TV Guide Daily
system, there is no need to set the clock; settings are
grayed out and unavailable.
Setup Menu Options
Clock
Settings
Manual. To set the clock manually:
Select
1.
Manual.
Set the time of day.
2.
Set the date.
3.
Select your time zone.
4.
Select either
5.
Applies or Ignore for Daylight Savings Time.
Note: If using Manual, each time the time change occurs, you must open this
menu and set the TV’s clock ahead or back.
Auto. To set the clock automatically:
Select
1.
Auto.
Select your time zone.
2.
Select either
3.
Applies or Ignore for Daylight Savings Time.
After exiting the menus, tune the TV to an analog station on
4.
ANT 1 or ANT 2
carrying XDS data, typically a PBS station.
Note:
With the
•
Auto setting and Applies selected for Daylight Savings Time, the TV’s
clock adjusts automatically to daylight savings time.
The TV’s clock will be reset if you tune to a channel sending incorrect time
•
data. To prevent unwanted clock resets, first use the
Auto method to set
the clock from a channel sending the correct time, then change the method
to
Manual.
Time
(
Manual
option only)
With the hour highlighted, press
1.
repeatedly to change the hour and the
AM/PM indicator. Press and hold to change the hour display quickly.
Press
2.
ENTER to set the hour.
With the minutes highlighted, press
3.
to change the minutes. Press and
hold to change the minutes display quickly.
Date
(
Manual
option only)
With the month highlighted, press
1.
to select. Press
ENTER to set.
With the day highlighted, press
2.
to select. Press
ENTER to set.
With the year highlighted, press
3.
to select the current year.
Time Zone
Eastern, Central,
Mountain,
Pacific, etc.
Required for both the
Manual and Auto methods.
Daylight
Savings
Time
Applies
Ignore
Required for both the
Manual and Auto methods. Select
the option for your area.
Setup menu, Clock options