MITSUBISHI ELECTRIC 148 Series - Manual (Page 23)

3. TV Connections 23
DVI Video Device (Cable Box, Satellite
Receiver, DVD Player, or Other Device)
Connect DVI devices (digital only) to the TV’s HDMI
input jacks.
Analog stereo audio cables and a DVI-to-HDMI cable or
DVI/HDMI adapter and HDMI cable are required.
Connect the DVI-to-HDMI cable (recommended) or 1.
HDMI cable with DVI/HDMI adapter from the DVI
device’s back panel to the TV’s HDMI jack.
Note: If you are using a DVI/HDMI adapter, it is impor-
tant to connect the adapter to the DVI device for
best performance.
Connect a set of audio cables from 2. AUDIO OUT
on the DVI device back panel to the DVI/PC INPUT
AUDIO on the TV main panel. Connect the red
cable to the R jack and the white cable to the L
jack.
Note: The HDMI connection supports copy protection
(HDCP).
Some devices require connection to an analog input
first in order to view on-screen menus and to select DVI
as the ouput. Please review your equipment instruc-
tions for DVI connectivity and compatibility.
HDMI
4
3
2
1
IR-
Output / External
Controller Input
S-VIDEO
VIDEO
AUDIO
L
R
INPUT3
INPUT2 INPUT1
L R
AVR AUDIO
OUTPUT
AUDIO
L
R
Pb
Y Y / VIDEO
Pr
ANT2/AUX ANT1/MAIN
DIGITAL
AUDIO
OUTPUT
NetCommand
) i 0
8 0
1 /
p 0
2 7 /
p
0 8
4 / i
0 8
4 (
AUDIO
R
DVI/PC
L
AUDIO
R
DVI/PC
L
AUDIO
R
DVI/PC
L
DVI OUT
AUDIO
R L
Digital DVI device
TV
main
panel
1.
1.
2.
2.
Figure 3. Connecting a digital DVI device
Standard Cable Box, Satellite Receiver,
or Other Device with S-Video
Required: S-Video cable and left/right analog stereo
audio cables.
Connect the cable from the outside cable or satel- 1.
lite service to CABLE IN or SATELLITE IN on the
cable box or satellite receiver.
Connect an S-Video cable from
2. S-VIDEO OUT on
the cable box or satellite receiver back panel to
INPUT 3 S-VIDEO on the TV main panel.
Connect left (white) and right (red) audio cables
3.
from AUDIO OUT on the cable box or satellite
receiver to INPUT 3 AUDIO L and R on the TV main
panel.
Note: Refer to the cable box or satellite receiver
Owner’s Guide for cable or dish antenna con-
nections to the receiver.
HDMI
4
3
2
1
IR-
Output / External
Controller Input
S-VIDEO
VIDEO
AUDIO
L
R
AUDIO
R
DVI/PC
L
INPUT3
INPUT2 INPUT1
L R
AVR AUDIO
OUTPUT
AUDIO
L
R
Pb
Y Y / VIDEO
Pr
ANT2/AUX ANT1/MAIN
DIGITAL
AUDIO OUTPUT
NetCommand
) i 0
8 0 1 /
p 0
2 7 /
p
0 8
4 / i
0 8
4 (
S-VIDEO
S-VIDEO
AUDIO
L
R
AUDIO
L
R
AUDIO
S-VIDEO
OUT
L
R
Any S-Video
device TV main panel
2.
2.
1.
3.
3.
CABLE IN or
SATELLITE IN
Incoming
cable from
wall
Connect audio
cables to INPUT
3 AUDIO
Figure 4. Connecting a device with S-Video