MITSUBISHI ELECTRIC 148 Series - Manual (Page 9)

1. Television Overview 9
TV Main Panel
HDMI
VIDEO: 480i,
480p /720p
1080i /1080p
AUDIO:
PCM STEREO
PC: VGA,
W-VGA, SVGA,
W-SVGA, XGA,
W-XGA, SXGA /
720p/1080p
4
3
2
1
IR-
Output / External
Controller Input
S-VIDEO
VIDEO
AUDIO
L
R
AUDIO
R
DVI/PC
L
INPUT3
INPUT2 INPUT1
L R
AVR AUDIO
OUTPUT
AUDIO
L
R
Pb
Y Y / VIDEO
Pr
ANT2/AUX ANT1/MAIN
DIGITAL
AUDIO
OUTPUT
NetCommand
) i 0
8 0
1 /
p 0
2 7 /
p
0 8
4 / i
0 8
4 (
2
11
13
3
8
4
12
1
5
5
6
9
7
RS-232C jack
offered on 246
Series TVs.
Subwoofer output
offered on 246
Series TVs.
10
1. ANT 1/ANT 2 (Antenna)
If you are connecting an antenna or direct cable service
without a cable box, connect the main antenna or cable
source to
ANT 1. Use ANT 2 for a second source.
ANT 1 and ANT 2 can each receive digital and analog
over-the-air channels from a VHF/UHF antenna or non-
scrambled digital/analog cable source.
ANT 1/MAIN and CableCARD™
Use ANT 1/MAIN to receive premium subscription
cable TV service authorized by the CableCARD™ access card.
The CableCARD access card is provided by your local cable
company.
2. Component Video (INPUT 1, INPUT 2)
Y Pb Pr Component Video (480i/480p/720p/1080i)
Use these jacks to connect devices with component video
outputs, such as DVD players, external HDTV receivers, or com-
patible video game systems. Use the adjacent
AUDIO R and L
jacks for INPUT 1 or INPUT 2 if you wish to send audio to the TV.
See Appendix A specifications for signal compatibility.
3. AUDIO L and R (INPUT 1, INPUT 2)
Analog stereo inputs shared by more than one video input.
INPUT 1 • audio jacks are for use with INPUT 1 component
video (Y Pb Pr) or composite video (single yellow cable).
INPUT 2 • audio jacks are for use with INPUT 2 component
video exclusively.
4. S-VIDEO (INPUT 3)
Connect an S-Video device to this input. Use the AUDIO R and L
jacks for INPUT 3 (item 6) if you wish to send audio to the TV.
5. Composite Video (INPUT 1, INPUT 3)
Use the VIDEO jacks to connect a VCR, Super VHS (S-VHS)
VCR, DVD player, standard satellite receiver, or other A/V device
to the TV. Use the adjacent
AUDIO R and L inputs for INPUT 1 or
INPUT 3 if you wish to send audio to the TV. Note that the INPUT
3 composite video jack is automatically disabled when you
connect to S-VIDEO.
6. AUDIO L and R (INPUT 3)
Analog stereo inputs shared by INPUT 3 composite
video and S-VIDEO.
7. DVI/PC INPUT AUDIO
Use the DVI/PC INPUT AUDIO jack when connecting
a DVI device to one of the TV’s HDMI inputs using a
DVI-to-HDMI cable. These jacks allow you to send
left and right analog audio from your computer or
other DVI device to the TV.