MITSUBISHI ELECTRIC 148 Series User Manual
Page 8
8
1. Television Overview
Front-Panel Indicators
STATUS
•
indicator. Off during normal TV
operation.
POWER/TIMER
•
indicator. Lit when TV is
powered on; flashes when TV is powered
off and the auto-on TV Timer is set.
IR Sensor
•
(Infrared Sensor). Detects infra-
red signals emitted by the remote control.
STATUS Indicator
LED Color TV Condition
Additional Information
None
Normal TV on or standby condition. Normal operation.
Red
TV may require service.
Turn off the TV and unplug the set from the AC power source.
Wait one minute and then plug the set back in. See Appendix F.
If the LED is still on, contact your dealer or a Mitsubishi
Authorized Service Center. Go to www.mitsubishi-tv.com or call
1-800-332-2119 to receive Authorized Service Center information.
POWER Indicator
LED Color TV Condition
Additional Information
None
Standby condition.
Normal operation.
Green
TV is powered on.
Normal operation.
Green
TV powered off, auto-on timer is set. Normal operation. TV can be turned on at any time.
Green
1. TV just plugged into AC outlet.
Wait approximately one minute for blinking to stop before turning
on. Normal operation.
2. AC just restored after power failure.
3. TV rebooting after System Reset
used.
4. TV rebooting after power fluc-
tuation or receiving abnormal
digital signals from a digital
channel or digital device.
5. You have begun the procedure
to update software from an
authorized flash memory device.
Off
Steady On
Slow Blinking
Fast Blinking
STATUS
POWER
148 Series TVs
STATUS
POWER
IR Sensor
IR Sensor
246 Series TVs