Moxa Technologies INTELLIO C218 - Manual (Page 24)

3-6 Intellio C218Turbo /PCI User's Manual
8. Click [OK] in the “Individual Port Setting” and the “Property” dialog boxes to
go back to the “MOXA Configuration Panel” dialog box. Click [OK] to finish
the configuration.
However, if you installed more than one board, click [Add] and repeat steps 6
and 7 to configure another board. Up to four
Intellio C218Turbo/PCI boards can
be installed in a system.
9. When configuration is done, click on [OK] button for “Network ” dialog box.
10. Restart Windows NT system. The latest configuration will not take effect
unless the system restarts.
Note !
Please double check if all the
Intellio C218Turbo/PCI components:
Control Board, link cable and external cable/box, are connected
and fastened tightly in order to ensure the system and driver will
start successfully later.
11. Once the system restarts, you may check the event log issued by MOXA drive
to see if the ports of the board are initialized successfully.