Moxa Technologies INTELLIO C218 - Manual (Page 85)

Troubleshooting
Intellio C218Turbo /PCI User's Manual 6-3
3. Windows NT system panic (blue screen).
The possible reason is IRQ or memory conflict with other ISA Bus adapters like
LAN and SCSI board or system BIOS. Please refer to the corresponding problem
in previous Section "General Troubleshooting" for solutions.
4. Error Message: C218tnt.cod file not found!
Error Message: C218tnt.cod file length is wrong!
Error Message: C218tnt.cod file data content error!
It means something is wrong with driver installation or the file has been deleted
accidentally or corrupted somehow. To recover the file, simply install the driver
again.
Windows 95/98
This section is specific for troubleshooting under Windows 95/98. For general
problems and solutions, please see previous Section “General Troubleshooting”.
1. Error Message “MOXA C218Turbo/PCI (BusNo=xx, DevNo=xx) at base
memory [XXX] interrupt failure!” appears.
This indicates MOXA board is found but the IRQ is conflicting with other
adapter. Make sure there is no conflict with other adapter's IRQ. Check the PCI
BIOS IRQ setting and make sure IRQ is available.
2. Error Message: C218tnt.cod file not found!
Error Message: C218tnt.cod file length is wrong!
Error Message: C218tnt.cod file data content error!
It means something is wrong with driver installation or the file has been deleted
accidentally or corrupted somehow. To recover the file, simply install the driver
again.