Moxa Technologies INTELLIO C218 - Manual (Page 52)

3-34 Intellio C218Turbo /PCI User's Manual
However, before the board reset is issued, you must make sure that
1. All enabled ports must be disabled.
2. All processes related to the
Intellio C218Turbo/PCI, including getty or tty
monitor, are killed.
Once the board is reset, the following message may show if it is successful.
MOXA Serial I/O Board (Ver x.x)
Downloading
MOXA-C218Turbo/PCI (MemBank=XX000;BusNo=X;DevNo=X) is found.
If one of the following message appears, please see Chapter "Troubleshooting".
WARNING! C218Turbo/PCI (MemBank=XX000;BusNo=X;DevNo=X) not found!
Or ERROR! C218Turbo/PCI (MemBank=XX000) download failed!
Driver Removal
If you want to remove the
Intellio C218Turbo/PCI device driver and return to your
previous system configuration, simply press Enter in this function entry and answer
“Y” to confirm. Then the system will be rebuild. This may take some time. If you
answer “N”, no action will be taken.