Moxa Technologies INTELLIO C218 - Manual (Page 36)

3-18 Intellio C218Turbo /PCI User's Manual
Once the installation is finished, error conditions of the board, if any, are displayed
on the screen. Otherwise, everything should be fine.
If an error message similar to “C218Turbo/PCI (BusNo=x, DevNo=x) at base
memory [XXX] interrupt failure!” appears, consult the “Troubleshooting” chapter.
Note !
Up to now, the driver installation of
Intellio C218Turbo/PCI is
completed and successful including the board and port
configuration. However, if changes of the board and port
configuration are needed, please refer
to the next section "Configuring the Board and Port" for more
configuration details.
Note !
Once the board and driver are installed and the driver restarts
successfully, you can start to develop applications by using
PComm
library (See Chapter “Serial Programming Tools”) or using Microsoft
Win32 API. Also you can execute any ready-made application such as
PComm utility Terminal emulator (See Chapter “Serial Programming
Tools”) or HyperTerminal to transmit/receive data as well as Remote
Access Service to provide dial-up networking capability.
l If multiple boards are installed at the same time, the same scenario applies for
the next boards, except that no driver diskette is asked any more.
l Similarly, if you want to add more boards and the driver has been installed
before, simply plug the
Intellio C218Turbo/PCI board and Windows 95/98
will automatically detect and install the required driver.