Marantz PMD620MKII - Manual (Page 45)

33
Skip Back
DISPLAY
MENU/STORE
SKIP BACK
VOL
ENTER
VOL
RETAKE
Press the SKIP BACK button during playback or pause to return
the amount of time set in the preset Skip Back from the current
playback point. ( v P.64)
When this button is pressed during the Rec-Pause mode, the
Retake Record mode is set.
Passcode Input
The passcode between 0000 and 9999 that is set at “Passcode”
must be input to make the “Menu Lock” and “Passcode” settings
on the preset menu and to play files recorded with encrypted
recording.
When starting to make these settings or to play such files, the
passcode input screen appears on the display and the character
selected with the cursor flashes. By factory default, “0000” is
displayed.
1.
Press the VOL + or VOL – button to change the character.
• The number increases between 0 and 9 each time the VOL
+ button is pressed, and decreases between 0 and 9 each
time the VOL – button is pressed.
• Press the 8 or 9 button to move the cursor.
2.
Either press the 1/3/ENTER button or press the 9 button
with the cursor set at the last character to enter the passcode.
• Inputting can be cancelled by pressing the STOP/CANCEL
button.
Note:
If you have forgotten the passcode, you can change it to “0000” by restoring
the PMD620MKII to the factory defaults. (
v P.79)