Marantz PMD620MKII - Manual (Page 75)

63
11. Low Cut
The bass region of the input audio is cut and the audio is
recorded. Set to On to reduce noise such as the sound of the
wind when recording in outdoor.
1.
From Stop, press and hold the DISPLAY button for one
second.
2.
Press the VOL + or VOL – button to select Preset Menu. Then
press the 1/3/ENTER button to accept.
3.
Press the VOL + or VOL – button to select Preset 1, 2, 3 or
renamed Preset. Then press the 1/3/ENTER button to accept
the selected Preset.
4.
Press the VOL + or VOL – button to select “Edit” and press the
1/3/ENTER button to accept.
5.
Press the VOL + or VOL – button to select the Low Cut item.
Then press the 8 or 9 button to tab through the Low Cut
choices (On or Off).
6.
Press the VOL + or VOL – button to select other Menu
choices. When changing the Preset is complete, press the
DISPLAY button to store the changes, or press the STOP/
CANCEL button to exit Menu mode without storing any
changes.
12. Mic Power
The Mic Power allows you to switch the power on or off so supply
to the external condenser microphone from the MIC jack of the
PMD620MK II .
1.
From Stop, press and hold the DISPLAY button for one
second.
2.
Press the VOL + or VOL – button to select Preset Menu. Then
press the 1/3/ENTER button to accept.
3.
Press the VOL + or VOL – button to select Preset 1, 2, 3 or
renamed Preset. Then press the 1/3/ENTER button to accept
the selected Preset.
4.
Press the VOL + or VOL – button to select “Edit” and press the
1/3/ENTER button to accept.
5.
Press the VOL + or VOL – button to select the Mic Power item.
Then press the 8 or 9 button to tab through the Mic
Power choices (On or Off).
6.
Press the VOL + or VOL – button to select other Menu
choices. When changing the Preset is complete, press the
DISPLAY button to store the changes, or press the STOP/
CANCEL button to exit Menu mode without storing any
changes.