Marantz PMD620MKII - Manual (Page 74)

62
9. Silent Skip
The Silent Skip automatically pauses recording when there is a
period of silence and resumes recording when sound resumes.
This feature is often referred to as voice activated recording.
Silent Skip looks for sound below a preset level for three seconds
time. When that occurs, the PMD620MK II switches to record
pause. When a signal above the preset level is input, recording
resumes.
1.
From Stop, press and hold the DISPLAY button for one
second.
2.
Press the VOL + or VOL – button to select Preset Menu. Then
press the 1/3/ENTER button to accept.
3.
Press the VOL + or VOL – button to select Preset 1, 2, 3 or
renamed Preset. Then press the 1/3/ENTER button to accept
the selected Preset.
4.
Press the VOL + or VOL – button to select “Edit” and press the
1/3/ENTER button to accept.
5.
Press the VOL + or VOL – button to select the Silent Skip item.
Then press the 8 or 9 button to tab through the Silent
Skip choices (Off, –60dB, –54dB, –38dB or –20dB).
6.
Press the VOL + or VOL – button to select other Menu
choices. When changing the Preset is complete, press the
DISPLAY button to store the changes, or press the STOP/
CANCEL button to exit Menu mode without storing any
changes.
10. Mic Attenuator
The Mic Attenuator let you select the direct use of microphone(s)
that differ in sensitivity.
1.
From Stop, press and hold the DISPLAY button for one
second.
2.
Press the VOL + or VOL – button to select Preset Menu. Then
press the 1/3/ENTER button to accept.
3.
Press the VOL + or VOL – button to select Preset 1, 2, 3 or
renamed Preset. Then press the 1/3/ENTER button to accept
the selected Preset.
4.
Press the VOL + or VOL – button to select “Edit” and press the
1/3/ENTER button to accept.
5.
Press the VOL + or VOL – button to select the “Mic Atten.”
item. Then press the 8 or 9 button to tab through the
“Mic Atten.” choices (0dB, –12dB or –24dB).
6.
Press the VOL + or VOL – button to select other Menu
choices. When changing the Preset is complete, press the
DISPLAY button to store the changes, or press the STOP/
CANCEL button to exit Menu mode without storing any
changes.