Marantz PMD620MKII - Manual (Page 76)

64
13. Input Jack
The Input Jack menu choice allows you to select the type of the
Input Jack for Stereo or Mono.
1.
From Stop, press and hold the DISPLAY button for one
second.
2.
Press the VOL + or VOL – button to select Preset Menu. Then
press the 1/3/ENTER button to accept.
3.
Press the VOL + or VOL – button to select Preset 1, 2, 3 or
renamed Preset. Then press the 1/3/ENTER button to accept
the selected Preset.
4.
Press the VOL + or VOL – button to select “Edit” and press the
1/3/ENTER button to accept.
5.
Press the VOL + or VOL – button to select the Input Jack item.
Then press the 8 or 9 button to tab through the Input
Jack choices (Stereo or Mono).
6.
Press the VOL + or VOL – button to select other Menu
choices. When changing the Preset is complete, press the
DISPLAY button to store the changes, or press the STOP/
CANCEL button to exit Menu mode without storing any
changes.
14. Skip Back
How to change the Skip Back parameters.
1.
From Stop, press and hold the DISPLAY button for one
second.
2.
Press the VOL + or VOL – button to select Preset Menu. Then
press the 1/3/ENTER button to accept.
3.
Press the VOL + or VOL – button to select Preset 1, 2, 3 or
renamed Preset. Then press the 1/3/ENTER button to accept
the selected Preset.
4.
Press the VOL + or VOL – button to select “Edit” and press the
1/3/ENTER button to accept.
5.
Press the VOL + or VOL – button to select the Skip Back item.
Then press the 8 or 9 button to tab through the Skip
Back choices (0.5 sec to 60 sec)
6.
Press the VOL + or VOL – button to select other Menu
choices. When changing the Preset is complete, press the
DISPLAY button to store the changes, or press the STOP/
CANCEL button to exit Menu mode without storing any
changes.