Milwaukee Heavy-Duty Sanders and Grinders User Manual
Page 3
page 3
1. Rear handle
2. Trigger
3. Lock-on button (select models)
4. Handle release button (select models)
5. Side handle
6. Wheel guard (select models)
7. Grinding wheel (select models)
8. Guard adjustment lock lever (select models)
9. Spindle lock button
10. Side handle socket
SPECIFIC SAFETY RULES - SANDERS AND GRINDERS
FUNCTIONAL DESCRIPTION
1. Always use proper guard with grinding wheel. A guard protects operator from broken wheel fragments.
2. Accessories must be rated for at least the speed recommended on the tool warning label. Wheels and other accessories running over rated
speed can fly apart and cause injury.
3. Make sure all wheel flanges and other mounting hardware are in good condition and are always used properly. Defective or missing parts
may damage the wheels and other accessories. Always use mounting hardware supplied with the tool.
4. Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord.
Contact with a live wire will make exposed metal parts of the tool live and shock the operator.
5. Keep hands away from all cutting edges and moving parts.
6. Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free replacement.
7. WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause
cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
lead from lead-based paint
crystalline silica from bricks and cement and other masonry products, and
arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.
5
8
7
6
2
3
4
10
(on bottom)
9
1
Symbology
Volts Alternating Current/
Direct Current
No Load Revolutions per Minute
(RPM)
Amps
Canadian Standards Association
Underwriters Laboratories, Inc.
Double Insulated
Specifications
Cat.
No.
Sanders
6080-20
6081-20
6082-20
Grinders
6086-20
6088-20
6089-20
No Load
RPM
6000
6000
6000
6000
6000
6000
Volts
AC/DC
120
120
120
120
120
120
Spindle
Thread
Size
5/8"-11
5/8"-11
5/8"-11
5/8"-11
5/8"-11
5/8"-11
Amps
15
15
15
15
15
15
Wheel
Size
7"/9"
7"/9"
7"/9"
9"
7"
9"
Min. Wheel
RPM Rating
6500
6500
6500
6500
6500
6500
D.I.* or
Grounded
D.I.
Grounded
D.I.
D.I.
D.I.
D.I.
* Double Insulated