Motorola MVME2400 - Manual (Page 22)

1-6 Computer Group Literature Center Web Site
Preparing and Installing the MVME2400-Series Module
1
Connect any other optional
devices or equipment you will be
using. Connector Pin Assignments C-1
For more information on optional devices
and equipment, refer to the documentation
provided with that equipment.
Power up the system. Installing the MVME240x Hardware 1-13
Status Indicators 2-4
If any problems occur, refer to the section
Diagnostic Tests in Chapter 5, PPCBug. 5-10
You may also wish to obtain the PPCBug
Diagnostics Manual, listed in Appendix A,
Ordering Related Documentation. A-1
Examine the environmental
parameters and make any
changes needed. ENV - Set Environment 6-3
You may also wish to obtain the PPCBug
Firmware Package User’s Manual, listed in
Appendix A, Ordering Related
Documentation. A-1
Program the MVME240x module
and PMCs as needed for your
applications. Preparing the MVME240x Hardware 1-7
Programming the MVME240x 4-1
For additional information on PMCs, refer to
thePMC manuals provided with these cards.
You may also wish to obtain the
MVME2400-Series VME Processor Module
Programmer’s Reference Guide, listed in
Appendix A, Ordering Related
Documentation. A-1
Table 1-3. Start-Up Overview (Continued)
What you need to do ... Refer to ... On page ...