Motorola MVME2400 - Manual (Page 3)

Preface
The MVME2400-Series VME Processor Module Installation and Use manual provides
information you will need to install and use your MVME2400-series VME processor
module. The MVME2400 VME processor module is based on an MPC750 PowerPC
microprocessor, and features dual PCI Mezzanine Card (PMC) slots with front panel and/
or P2 I/O. The MVME2400 is currently available in the following configurations:
The MVME2400-series module is compatible with optional double-width or single-width
PCI Mezzanine Cards (PMCs) , and the PMCspan PCI expansion mezzanine module. By
utilizing the two onboard PMC slots and stacking PMCspan(s), the MVME2400 provides
support for up to six PMCs.
This manual includes hardware preparation and installation instructions for the
MVME2400-series module, information about using the front panel, a functional
description, information about programming the board, using the PPCBug debugging
firmware, and advanced debugger topics. Other appendices provide the MVME2400-series
specifications, connector pin assignments, and a glossary of terms. Additional manuals you
may wish to obtain are listed in Appendix A, Ordering Related Documentation.
The information in this manual applies principally to the MVME2400-series module. The
PMCspan and PMCs are described briefly here but are documented in detail in separate
publications, furnished with those products. Refer to the individual product documentation
for complete preparation and installation instructions. These manuals are listed in
Appendix A, Ordering Related Documentation.
Model MPC Memory Handles
MVME2401-1 MPC750
@ 233 MHz 32MB ECC SDRAM Scanbe Handles
MVME2401-3 32MB ECC SDRAM 1101 Handles
MVME2402-1 64MB ECC SDRAM Scanbe Handles
MVME2402-3 64MB ECC SDRAM 1101 Handles
MVME2431-1 MPC750
@ 350 MHz 32MB ECC SDRAM Scanbe Handles
MVME2431-3 32MB ECC SDRAM 1101 Handles
MVME2432-1 64MB ECC SDRAM Scanbe Handles
MVME2432-3 64MB ECC SDRAM 1101-1 Handles
MVME2433-1 128MB ECC SDRAM Scanbe Handles
MVME2433-3 128MB ECC SDRAM 1101-1 Handles