Miele NOVOTRONIC T 7634 - Manual (Page 40)

c Connecting directly to a wall
vent
If you can place the dryer directly
against the external wall of the room,
this vent configuration is
advantageous. The short overall pipe
length has a beneficial effect on time
and energy consumption. However,
you must make an opening in the wall
to install the wall kit.
You will need a wall pipe kit as well as a
flexible spacer ring.
A Before breaking through the wall... . .
. . . read the installation instructions
accompanying the kit.
. . . and study the following
dimensional drawings.
View from above:
1. Wall pipe
2. Flexible foam gasket
Side view:
1. Wall pipe
2. Flexible foam gasket
B Fit the flexible foam gasket (2) onto
the wall pipe adapter (1).
C Push the dryer up against the wall.
Installing the dryer vent
40