Miele NOVOTRONIC T 7634 - Manual (Page 9)

Display
The following functions are selected
from the display:
– Delay
– Selecting duration of timed
programs.
– Programmable functions.
The display also shows:
– Program duration.
– Program stage:
Drying
Cooling down
End.
– Test and fault messages.
Program duration/ Estimated time
remaining
When a program is selected, the
estimated time remaining will be
displayed. This is to be considered an
estimate only.
The following factors can lead to
variations in the time remaining
estimate: Residual moisture after
spinning; type of fabric; size of load;
ambient temperature, or fluctuations in
the power supply.
The adaptive electronics constantly
adjusts to the individual wash load to
ensure a more accurate estimate of
time remaining. This estimate is
permanently monitored during drying,
which in some cases can lead to a
change in the estimate.
In this way, the delicate and smoothing
programs can end earlier, when a
certain temperature is reached. This
can happen with particularly fine
fabrics, very small loads, or if items
have previously been dried.
Delay
The delay time selected will be
displayed.
The delay time countdown begins after
pressing the Start button.
Once the time delay expired, the
estimated program duration will appear
in the display and the drying begins.
Programmable functions
The programmable functions can be
used to adapt the dryer to your
personal requirements. In programming
mode, the display will show the function
selected.
Operating the dryer
9