Miele NOVOTRONIC T 7634 - Manual (Page 41)

d Vent collector duct
To prevent condensed water buildup in
the non-operating dryers:
^ For each dryer, install a non-return
flap R directly on the collector duct.
You will need an optional Miele
accessory* (see right) for this.
When installing from 3 to a maximum
of 5 dryers, the pipe diameterD must
be enlarged.
Number
of
dryers Pipe diameter multiplication
factor from Table II
1-2
3
4 - 5 1
1,25
1,5
1 Connection to connection duct
2 Miele non-return flap*
3 additional Miele Adapter*
4 Vent hose, flexible
^ Press the non-return flap(2) fully into
the Adapter (3).
Installing the dryer vent
41