Miller Electric RCT-224 Trailer - Manual (Page 6)

safety_trailer 8/03 OM-6611 Page 4
Section 1 − ASSEMBLY SAFETY PRECAUTIONS
1-1. Symbol Usage
Means Warning! Watch Out! There are possible hazards
with this procedure! The possible hazards are shown in
the adjoining symbols.
Y Marks a special safety message.
.
Means “Note”; not safety related.
This group of symbols means Warning! Watch Out! possible FAL-
LING EQUIPMENT and TILTING OF TRAILER hazards. Consult
symbols and related instructions below for necessary actions to avoid
the hazards.
1-2. Assembly Hazards
Y The symbols shown below are used throughout this manual to
call attention to and identify possible hazards. When you see
the symbol, watch out, and follow the related instructions to
avoid the hazard.The safety information given below is only a
summary of the more complete safety information found in the
Safety Standards. Read and follow all Safety Standards.
Y Only qualified persons should install, operate, maintain, and
repair this unit.
Y During operation, keep everybody, especially children, away.
FALLING UNIT can cause injury.
D Use equipment and blocks of adequate capac-
ity and size to lift and support unit.
D If using lift forks to move unit or parts, be sure
forks are long enough to extend beyond oppo-
site side of unit or parts to prevent tipping.
D Have two people of adequate physical strength
lift trailer parts.
TILTING OF TRAILER can cause injury.
D Use tongue jack or blocks to support weight.
D Properly install welding generator onto trailer
according to instructions.
READ INSTRUCTIONS.
D Use only genuine replacement parts from
manufacturer.
D Perform maintenance according to this
manual.
FLYING METAL, DIRT can injure eyes.
D Wear approved safety glasses with side
shields when assembling and maintaining
trailer.
Read and follow all trailer towing Safety Precautions at beginning of manual before using this
trailer.