Metrologic Instruments MS9544 - Manual (Page 17)

13
S TAND
There are two options for assembling the stand. The first option allows the stand
to be self-supporting and moved freely or placed anywhere on the countertop.
The second option is used if the stand will be bolted/hard-mounted to the
countertop.
Stand Option 1: Self-Supported for use with Kit #46-46128
Step 1
Slide the apron (
MLPN 50-50440)
over the stand ( MLPN 36-00454).
Step 2
Position the stand so it sits
under the tab on the apron.
Then secure the apron to the
stand using the M3 x 6 mm screws
(
MLPN 18-18670) and the #5
washers ( MLPN 18-18671)
provided.
Stand Option 2: Hard-Mounted to Countertop for use with Kit #46-46351
Step 1
Drill four #39 holes in the countertop.
Step 2
Secure the base (
MLPN 36-36080)
to the countertop with the four
#8 wood screws (
MLPN 18-18057) provided.
Stand
Apron
Apron
Stand
M3 x 6 mm
Screw
#5 Washer
Tab
Figure 17.
Figure 18.
Base
#8 Wood
Screw
2.00 in
2.00 in
Figure 19.
Figure 20.