Metrologic Instruments MS9544 - Manual (Page 37)

33
D ESIGN S PECIFICATIONS
D ESIGN S PECIFICATIONS
O PERATIONAL
Light Source: Visible Laser Diode 650 nm
Laser Power: Less than 1 mW (peak)
Depth of Scan Field:
0 mm – 200 mm (0” – 8”) for 0.330 mm (13 mil) bar code at
default setting
Scan Speed: 180 ±10 scan lines per second
Scan Pattern: Single scan line
Minimum Bar Width: 0.127 mm (5.0 mil)
Infrared Activation:
Long Range: 0 mm – 280 mm ± 50 mm (0” – 11” ± 2”)
Short Range: 0 mm – 100 mm ± 25 mm (0” – 4” ± 1”)
Decode Capability:
Autodiscriminates all standard 1-D bar codes, RSS-14,
PDF417 and truncated PDF417; for others symbologies call
a Metrologic service representative
System Interfaces:
PC Keyboard Wedge, RS232, OCIA, Light Pen Emulation,
Laser Emulation, IBM 468X/469X, Stand-Alone Keyboard,
USB (low speed and full speed)
Print Contrast: 30% minimum reflectance difference
Number Characters
Read:
Up to 80 data characters on 1D; 1850 text characters for
PDF417
Roll, Pitch, Yaw: 42°, 68°, 52°
Beeper Operation: 7 tones or no beep
Indicators (LED)
Default Settings
Blue = laser on, ready to scan; White = good read;
Yellow (MS9544 Only) = auto trigger mode active
M ECHANICAL
Length: 198 mm (7.8”)
Width: Handle - 45 mm (1.8”), Head - 78 mm (3.1”)
Depth: 40 mm (1.6”)
Weight: 149 g (5.25 oz)
Termination: 10 pin modular RJ45
Specifications subject to change without notice.