Muratec MFX-1200 - Manual (Page 102)

Advanced features
Fax dialing with programmable one-touch
To dial a fax call using a programmable one-touch number:
1 Set your document in the ADF or on the FBS glass.
2 Make any necessary adjustments as usual.
3 If you are using the FBS glass, set the document size by pressing DOCUMENT
SIZE before you press the programmable one-touch key.
4 Press the programmable one-touch key in which you ve stored the fax commu-
nication command.
Your fax will perform the operation now, or at whatever time you programmed.
Note: To review the details of each operation, review the instructions for that
operation. See page 3.36 for a list of each operation and where to find it.
If you programmed this key to delay its operation, the LCD shows:
If you programmed this key to perform the operation immediately after you press it,
the
LCD shows the number:
Printing a list of your programmable one-touch keys
You fax machine can print a list of the commands you ve stored in your programma-
ble one-touch keys.
The list includes:
(1) each key s one-touch number
(2) the fax/telephone number
(3) when the command should start
(4) which command you ve selected
(5) if applicable, the selected call group(s) or F-Code box(es) you ve stored in
the key
(6) the individual settings for each key
To print a list of programmable one-touch keys, press Program key, E , 1, 0, 8,
ENTER .
Erasing a programmable one-touch key
1 Press Program key, A , 3, 0, 2, ENTER . The LCD shows the first programmable
one-touch number that has been programmed:
Note: If P2 appears, it means P1 is empty.
2 Press the programmable one-touch key you want to erase. Here, we ve
selected P2:
3 To erase a different programmable one-touch key than the one that appears
on the
LCD , press that key now.
4 Press ENTER . The LCD shows:
Important: If you want to quit without erasing the programmable one-
touch key you ve selected, press CANCEL . The fax will return to
step 2.
5 Press ENTER to erase the number.
To erase another programmable one-touch key, repeat steps 2 5. Or press STOP to
return to standby mode.
Erase P One-Touch
** Complete **
P2:Erase P One-Touch
Check Enter/Cancel
Select Program No.
P2:Polling
Select Program No.
P1:Delayed
9-1-972-555-4335
A4 Normal
** Reserved **
Jan 29 2000 17:17
3.49