Muratec MFX-1200 - Manual (Page 113)

Memory transmission
Default setting: ON.
Note: When the machine s memory is full, it can transmit only through the docu-
ment feeder (real time transmission).
Note: When you use the FBS glass, the machine always uses memory transmission
even if you set the memory transmission to off.
To change the default setting of memory transmission:
1 Press Program key, B , 2, 0, 6, ENTER .
2 Press or until the mode you want appears.
In this example, we ve chosen Off.
3 Press ENTER to save the setting.
If the MEMORY TRANSMIT light glows, memory transmission is on.
If the MEMORY TRANSMIT light doesn t glow, memory transmission is off.
Quick Memory transmission
Default setting: ON.
Important: Your fax machine s memory transmission feature must be turned on
to use Quick Memory transmission (see above).
To change the default setting of Quick Memory transmission:
1 Press Program key, B , 2, 0, 7, ENTER . The LCD shows:
2 Press or until the mode you want appears.
Here, we ve chosen Off.
3 Press ENTER to save the setting.
TTI transmission
Default setting: ON.
Every fax page you send arrives at the receiving machine with a single line of text
at the very top of the page. This text lists a name, called the Transmit Terminal
Identifier (
TTI ), and a fax number. You can set the machine to not send the TTI .
1 Press Program key, B , 2, 0, 8, ENTER . The LCD shows:
2 Press or until the setting you want appears. In this example, we ve
chosen Off.
3 Press ENTER to save the setting.
TTI Tx :Off
← ←
/
→ →
/Enter
TTI Tx :On
← ←
/
→ →
/Enter
Quick Tx :Off
← ←
/
→ →
/Enter
Quick Tx :On
← ←
/
→ →
/Enter
Memory Tx :Off
← ←
/
→ →
/Enter
Memory Tx :On
← ←
/
→ →
/Enter
Changing the default settings
4.2