Muratec MFX-1200 - Manual (Page 122)

Changing the default settings
Print the Demo Page
The demo page provides a demonstration that highlights the features and functions
of the printer.
To print the demo page:
1 Press Program key, E , 2, 0, 1.
2 Press ENTER to print the demo page.
Print the Printer Configuration Page
The printer configuration page provides all the status and configuration of the
printer.
To print the printer configuration page:
1 Press Program key, E , 2, 0, 2.
2 Press ENTER to print the printer configuration page.
Print PCL Font List
The PCL font list provides a list of all PCL fonts currently installed in the printer.
To print the PCL font list:
1 Press Program key, E , 2, 0, 3.
2 Press ENTER to print the PCL font list.
Print NIC status
Note: To access this function, the optional NIC (Network Interface Card) is
required.
To print the NIC status:
1 Press Program key, E , 2, 0, 4.
2 Press ENTER to print the NIC status.
Set TCP/IP Address
Note: To access this function, the optional NIC (Network Interface Card) is
required.
When you using the TCP/IP protocol, enter an IP Address, Subnet mask and default
Getaway.
To print the PCL font list:
1 Press Program key, B , 4, 0, 1.
2 Press ENTER . The LCD will show:
3 Enter the IP Address for your printer using the numeric keypad, then press
ENTER to save the setting.
For example, your printer s IP Address is 200.1.37.47, you should press
2 0 0 0 0 1 0 3 7 0 4 7.
Set IP Address
000.000.000.000
01 TCP/IP
← ←
/
→ →
/Enter
04 NIC Status
← ←
/
→ →
/Enter
03 Font List
← ←
/
→ →
/Enter
02 Status Page
← ←
/
→ →
/Enter
01 Demo Page
← ←
/
→ →
/Enter
4.11
Printer options
Note: These options appear only if the optional printer controller has been installed.