Miller Electric OM-234 016D - Manual (Page 20)

OM-234 016 Page 11
SECTION 3 − INSTALLATION
3-1. Specifications
Wire Diameter Range
Approximate Wire
Feed Range
Cooling
Method
Maximum
Spool Size
Weld Circuit
Rating
Overall Dimensions Weight
.030 Thru .035 in
(0.8 Thru 0.9 mm)
Aluminum Wire
Or Flux Cored Wire
.023 Thru 035 in
(0.6 Thru 0.9 mm) Solid
Wire
Millermatic 140
AutoSet: 5 To 365 ipm
(0.13 To 9.27 mpm)
Millermatic 140:
5 To 435 ipm
(0.13 To 11.05 mpm)
Millermatic 180 And
Renegade 180:
65 To 625 ipm
(1.65 To 15.88 mpm)
Air Cooled
4 in (102 mm)
Diameter
22.5 Volts, 135
Amperes, 30%
Duty Cycle
Using Argon
Shielding Gas
Length:
13 in (330 mm)
Width:
2-1/4 in (57 mm)
Height:
8 in (203 mm)
5.6 lb (2.54 kg)
Gun With Cable
3-2. Removing MIG Gun From Welding Power Source
Open Pressure Assembly
.
Hold wire tightly to keep it
from unraveling.
Rewind Wire Onto Spool, Fasten
End Of Wire To Spool
Cut Off End Of Wire
Loosen Knob, Disconnect Gun Trigger
Plug, And Pull Gun From Unit
Ref. 802 982-A
Knob