Miller Electric OM-234 016D - Manual (Page 36)

OM-234 016 Page 27
Ref. 235 557-A
3/30 4/40 4.5/45 5.5/50 6.5/50 7/50 8/70 9/65 10/80
3/25 4/30 5/35 6/40 6.5/45 7/45 8.5/55 9/55 10/60
3/35 3.5/40 4/50 5/60 5.5/70 7/60 7.5/80 8/90 9.5/100
3/30 3.5/35 4/40 5/50 5.5/60 7/50 7.5/65 8/75 10/90
2.5/50 3.5/65 4.5/100
3/35 4/50 4.5/55 5.5/65 7/100
2.5/40 3.5/55 4.5/80 5/80 5.5/85 5.5/100
2.5/30 3.5/50 4.5/60 5/70 6/70 6/70 7/80
3/40 3.5/50 4/65 4.5/75 5.5/100
2.5/20 4/30 5/35 5.5/45 7.5/60
1.5/10 4/25 5/30 5.5/35 7.5/50
235557−A
7.5/100*
8.5/90* 9/100
2/75
18 ga.
115/230V
16 ga.
115/230V
14 ga.
115/230V
1/8”
115/230V
3/16”
115/230V
1/4”
115V
1/4”
230V
5/16”
230V
3/8”
230V
2/65
2.5/80
2.5/65
6/75
6/70
7/100
6.5/75
NOTE: Settings are approximate. Adjust as required.
“---” Means not recommended.
Thicker materials can be welded using proper technique,
joint preparation and multiple passes.
IMPORTANT: Match drive roll groove to diameter of wire being used.
Set Tension knob setting to 3 at start. Adjust tension
per instructions in the manual.
optional Spool Gun. Order part no. 300371
5.5/100