Lamp life and replace lamp – Marantz VP8100 User Manual
Page 19
15
ENGLISH
LAMP LIFE
The user can display the remaining lamp life at any time by
pressing the OSD key on the remote controller. LAMP LIFE is
displayed at the very bottom of the menu.
Notes:
• When the LAMP LIFE becomes less than 1000 HOURS, it is
recomended to replace the lamp unit. A lamp may be worn
out when the LAMP LIFE becomes less than 1000 HOURS.
• The projector is designed not to turn on after the lamp use
has exceeded 2000 hours. (LAMP LIFE 0 HOUR)
If the projector is in use, it will turn off.
Ǡ
Ǡ
When the lamp life expires in about 100 hours and the unit
is on, the remaining lamp life is diplayed on the screen.
Ǡ
Ǡ
When the lamp life expires in about 5 hours, the remaining
lamp life is displayed on the screen at one-hour interval.
To clear the menu above, press the MENU key.
Ǡ
Ǡ
When the lamp life has expired (LAMP LIFE 0 HOURS), the
unit will be immediately turned off, and the WARNING
indicator will blink in orange.
Use the following procedure to reset (initialize) the lamp life
indicator after replacing the lamp with a new one.
1.
Unplug the power cord.
2.
Wait about one minute and reconnect the power cord.
3.
Press the POWER key. Only the POWER key will be of
effect. The following message appears for 120 seconds.
4.
Select “YES”, using the
ǡ/Ǡ keys.
5.
Press the ENTER key. The lamp life indicator is now
initialized.
Lamp Life and Replace Lamp