Minicom Advanced Systems 5UM70166 - Manual (Page 12)

IP CONTROL
11
Consult your Network Administrator regarding the use of the DHCP. Note! Where
you have access to the server – your configured (or default) IP Control device
name will appear on the DHCP server’s interface, making it easy to locate.
When DHCP is disabled, enter the IP Address, Subnet Mask, and Default
Gateway for LAN 1, as given by your Network Administrator.
14. Saving changes
Click to save any configuration changes and restart the IP Control
system.
15. Administration > User Settings
From the menu click User Settings, Figure 7 appears.
Figure 7 User Settings
On this page an Administrator creates and edits users.
There are 3 levels of user access:
· Administrator
· User
· View only
Administrator
An Administrator has unrestricted access to all windows and settings and can “take
over” any active session (explained in section
23.1 on page 18). An Administrator
can change the name and password of all users.