Minicom Advanced Systems 5UM70166 - Manual (Page 14)

IP CONTROL
13
15.3 Deleting a user
To delete a user:
1. Select the user from the list.
2. Click .
3. Click , the changes are saved.
15.4 Blocking a user
An alternative to deleting a user is blocking a user. This means that the user’s name
and password is stored, but the user is unable to access the system. Check Block to
block a user. Uncheck Block to allow the user access.
16. Administration > Switch Configuration
When a KVM switch is connected to the system, you must configure the switch in
the system.
To do so:
1. From the menu click Switch Configuration. The KVM Switch Configuration
window appear, see Figure 8.
Figure 8 Switch Configuration
2. Choose the manufacturer and model of the connected KVM switch. The number
of possible connected servers appears in the Server Name section.
3. Change the name of the connected servers by highlighting the server and typing
a new name. Click to save changes.
Note! Server names left as UNUSED cannot be accessed.