Minicom Advanced Systems 5UM70166 - Manual (Page 16)

IP CONTROL
15
18. Security > Settings
Configure the security features, such as Account Blocking, Password Policy and
Idle Timeout, as explained below.
From the Security section click Settings, the Security Settings appear, see Figure
10.
Figure 10 Security Settings
The security Settings elements:
Account Blocking – decide on the number of attempts to login with a wrong
username or password after which there is a time lock or a total block.
Password Policy – You have the option of a standard or high security level of
password. The table below shows the parameters of the 2 options.
Standard Security Password High security Password
6 characters or more 8 characters or more must
include at least 1 digit and 1
upper case letter and 1 “special”
character as follows
!@#$%^&*()_-+={[}]”’:;?/><
Must not include the user name Must not include the user name
Check the box to enable the high security password policy. Unchecked, the
standard security policy applies.
Idle Timeout – Select the Timeout inactivity period after which the user is
disconnected from the system. Choose No Timeout to disable Timeout.